Material Estimates


Get a Free Roofing Estimate

See how you can save up to 50% on re-roofing costs.

Use our application rates below figure out how much product you need or use our roofing calculator.If you prefer to have our roofing contractor contact you for a roof inspection and a quote, please fill up our estimate request form.

Just a reminder.

Smooth, flat surfaces in good condition will need less product.Rough, pourous surfaces will need more product.

For metal roofs, add 15% to 25% to the area for pitches and ribs.

Use our roofing estimator for approximate material requirements.

Our roofing estimator is being updated & enhanced.

Please read our roof restoration specifications before purchasing and installing any product.

Application Rates

Asphalt Built UpBuilt Up Roofing Estimate

System Primer Base Coat Top Coat

Acrylic System

10-year (40 total mils)

Bonding Primer

0.65 gal. / 100 s.f.

Acrylic Elastomeric Coating

2.00 gal. / 100 s.f.

Acrylic Elastomeric Coating

2.00 gal. / 100 s.f.

Reinforced System

10-year (44 total mils)

Bonding Primer

2.00 gal. / 100 s.f.

Acrylic Elastomeric Coating

1.50 gal. / 100 s.f.

Acrylic Elastomeric Coating

1.50 gal. / 100 s.f.

Solvent System

10-year (30 total mils)

MultiService Primer

0.75 gal. / 100 s.f.

Butyl Rubber Coating

2.25 gal. / 100 s.f.

Butyl Rubber Coating

2.25 gal. / 100 s.f.

Metal Roofing Estimate
Metal Roofing

System Primer Base Coat Top Coat

Light Rust

10-year (30 total mils)

Acrylic Primer

0.50 gal. / 100 s.f.

Acrylic Elastomeric Coating

1.50 gal. / 100 s.f.

Acrylic Elastomeric Coating

1.50 gal. / 100 s.f.

Heavy Rust

10-year (32 total mils)

MultiService Primer

0.75 gal. / 100 s.f.

Acrylic Elastomeric Coating

1.75 gal. / 100 s.f.

Acrylic Elastomeric Coating

1.75 gal. / 100 s.f.

Modified Bitumen RoofingModified Bitumen Roofing Estimate

System Primer Base Coat Top Coat

Acrylic System

10-year (40 total mils)

Bonding Primer

0.65 gal. / 100 s.f.

Acrylic Elastomeric Coating

2.00 gal. / 100 s.f.

Acrylic Elastomeric Coating

2.00 gal. / 100 s.f.

Reinforced System

10-year (48 total mils)

Bonding Primer

2.50 gal. / 100 s.f.

Acrylic Elastomeric Coating

1.75 gal. / 100 s.f.

Acrylic Elastomeric Coating

1.75 gal. / 100 s.f.

Solvent System

10-year (48 total mils)

MultiService Primer

0.75 gal. / 100 s.f.

Acrylic Elastomeric Coating

2.25 gal. / 100 s.f.

Acrylic Elastomeric Coating

2.25 gal. / 100 s.f.

Polyurethane Foam RoofingPolyurethane Foam Roofing Estimate

System Primer Base Coat Top Coat

Standard System

10-year (40 total mils)

Bonding Primer

0.75 gal. / 100 s.f.

Acrylic Elastomeric Coating

2.00 gal. / 100 s.f.

Acrylic Elastomeric Coating

2.00 gal. / 100 s.f.

Silicone System

10-year (40 total mils)

Silicone Elastomeric Coating

1.75 gal. / 100 s.f.

Silicone Elastomeric Coating

1.75 gal. / 100 s.f.

Single Ply Roofing EstimateSingle Ply Roofing

System Primer Base Coat Top Coat

Acrylic System

10-year (32 total mils)

Bonding Primer

0.75 gal. / 100 s.f.

Acrylic Elastomeric Coating

1.50 gal. / 100 s.f.

Acrylic Elastomeric Coating

1.50 gal. / 100 s.f.

Reinforced System

10-year (40 total mils)

Bonding Primer

1.50 gal. / 100 s.f.

Acrylic Elastomeric Coating

1.25 gal. / 100 s.f.

Acrylic Elastomeric Coating

1.25 gal. / 100 s.f.

Solvent System

10-year (30 total mils)

MultiService Primer

0.75 gal. / 100 s.f.

Butyl Rubber Coating

2.25 gal. / 100 s.f.

Butyl Rubber Coating

2.25 gal. / 100 s.f.









  • Testimonials

    • Ronald S
      Virginia Beach VA

      I ordered a gallon of Liquid Rubber last summer, and inquired if it could be spread with an adhesive applicator trowel; the sales person was not aware of this having been tried. I tried using a commercially available trowel with 4 sawtooth teeth per inch, and 0.135 inch notch depths, holding the trowel at about a 45 degree tilt.
      Read more

    • G Sorrell
      Lufkin,TX
      Diboll Lumber Operations

      Everyone was SUPER helpful and knew the product, properties and application methods well. I applied to product on the trailer in about a 2-hour period one evening. It was tricky with the application, from a novice who had not done this before.
      Read more

    • H&W Property Management

      Donna,your staff and your customer service is the reason we buy from you. You had asked us several months ago if we would write up something for your Website. We wanted to get some additional orders first before coming to conclusions.
      Read more

    • T. Basset

      We have completed the resurfacing of our commercial roof back in April and ordered a few more pails for areas where we probably did not apply it thick enough. Just wanted to share these photos with you.
      Read more

    • B & T Contracting

      You have a great product here and we will be ordering for future jobs we have. We were a bit skeptical at first but when it was fully dry it looked as if we installed a new 15,000 sq piece of sheet EPDM.
      Read more

    • Jed L
      Biloxi MS

      This will be the third time our firm has ordered. We completed a project in 05 in the fall and waited for the winter. This was actually the first winter without any leaks. Great product overall.
      Read more

  • Contact

    home iconEPDM Coatings N.E Sales Office
    494 Bridgeport Ave Suite 101,
    PMB 342 Shelton CT 06484-4748
    Fax: 702-977-2936
    tell iconTel: 1-610-298-1989
    email iconEmail: [email protected]
    website iconWebsite: www.fixallroofs.com
Copyright © 2017 FixAllRoofs