3. TECHNICAL DATA

See table on the following page.

4. INSTALLATION

• All surfaces to be coated must be clean, dry and free of any oil, grease or dirt.
• Any existing coating must be checked for good adhesion.
• Before application, any loosely adhered coating must be removed and bare surfaces must be prepared, cleaned and checked for compatibility.
• SeamStitch Polyurethane Caulk is ready to use. Thinning is not recommended.
• Containers should not be left open for extended periods of time.
• Follow our roof repair and roof restoration procedures and always perform a coating adhesion test before doing the entire roof.

5. AVAILABILITY & COST

SeamStitch Polyurethane Caulk is available directly from Fixallroof Coatings, from authorized distributors and online. Contact Fixallroof Coatings for referral to a local Sales Representative or visit our website.

Pricing information can be obtained from Fixallroof Sales Representatives.

6. MAINTENANCE

Periodic maintenance of Fixallroof Roof Restoration System ensures extended service life and maintains reflectivity.

7. TECHNICAL SERVICES

Contact Fixallroof Coatings for Technical Support. Additional information, product literature, brochures, and specifications are available.

8. FILING SERVICES

Additional product information is available from Fixallroof Coatings.

Property

Value

Test Method

Color:

Gray

Viscosity:

39,800 ± 200 cps

Solids by volume:

80.0%±2%

Hardness:

40 Shore A

ASTM D-2240

Tensile Strength:

575±50 psi

ASTM D-412

Permeability:

0.8 perms

ASTM E-96

Elongation:

600%

ASTM D-412

Low Temp Flex:

Pass @ -60°F

ASTM D-412

Flash Point:

145°F

Coverage:

100 lineal feet / gal for 3" wide x 60 mils thick.

Application Temperature:

45°F - 95°F. Less than 95% relative humidity.

Dry Time:

3 - 6 hours. 12 - 24 hours (initial cure)

Shelf Life:

6 - 12 months @ 75°F