| 
|
COMPANY IDENTIFICATION
Lexis Coatings
1025 Rose Creek Dr
Ste 620 #138
Woodstock, GA 30189
770-755-1820
FOR EMERGENCIES
INFOTRAC: 800-535-5053
CAUTION
Prolonged or repeated contact may cause skin or eye irritation. May be harmful if swallowed. Protect from freezing.
HMIS Rating
Health: 2
Flammability: 1
Reactivity: 0
Personal Protection Index: S
EYE:
Contact may cause eye irritation.
SKIN:
Can cause moderate skin irritation.
INHALATION:
Avoid breathing vapors or mists. Prolonged or excessive inhalation may cause respiratory tract irritation. May cause
allergic respiratory reaction.
INGESTION:
Harmful if swallowed. Can burn mouth, throat and stomach.
CHRONIC EFFECTS
Sensitized (allergic) individuals may show allergenic lung and/or skin reaction. After an individual is diagnosed as sensitive
to isocyanates, no exposure should be permitted. Chronic effects of overexposure to xylene may include kidney or liver
damage.
REPRODUCTIVE HAZARDS
Exposure to Xylene may damage developing fetus.
CARCINOGENICITY INFORMATION
No known cancer hazards.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE
Asthma-like conditions may cause additional breathing problem.
|
|
EYE CONTACT
After initial flusing, remove any contact lenses and continue flushing for at least 15 minutes. Get medical attention if
irritation develops or persists.
SKIN CONTACTSKIN CONTACT
Remove contaminated clothing and shoes. Wash affected area immediately with large amounts of soap and water. Get
medical attention if irritation develops or persists.
INHALATION
If inhaled, remove to fresh air. If not breathing, give artificial respiration. Get medical attention if cough or other symptoms
develop.
INGESTION
Get immediate medical attention. Do not induce vomiting. Contact a physician. Never give anything by mouth to an
unconscious person.
FLAMMABLE PROPERTIES
Flash Point: 0°F
Auto Ignition Temperature: Not Established
FLAMMABLE LIMITS IN AIR
LEL: 1 %
UEL: Unknown
EXTINGUISHING MEDIA
Water, Carbon dioxide, foam or dry powder.
FIRE & EXPLOSION HAZARDS
Vapors may flow along surfaces to distant ignition sources and flash back. Closed containers exposed to heat may
explode. Contact with strong oxidizers such as liquid chlorine or concentrated oxygen may cause fire.
FIRE FIGHTING INSTRUCTIONS
Use water spray to cool non-involved containers.
As in any fire, wear self-contained breathing apparatus pressure-demand MSHA/NIOSH (approved or equivalent) and full
protective gear.
|
SAFEGUARDS (PERSONNEL):
Wear safety goggles. Wear appropriate protective equipment.
INITIAL CONTAINMENT:
Contain spilled material. Absorb spills with inert or absorbent material.
LARGE SPILLS PROCEDURE:
Shut off ignition sources including electrical equipment and flames. Ventilate enclosed areas or wear self-contained
breathing appratus.
Recover free liquid in closed containers. Clean area with absorbent material. Keep out of sewers and water courses.
RECOMMENDED STORAGE TEMPERATURE:
Minimum: 15.6 C (60.1 F)
Maximum: 26.7 C (80.1 F)
SHELF LIFE (in original, sealed containers):
6 months @ 26.7 C
HANDLING (PERSONNEL):
Avoid prolonged or repeated contact with skin. Wash hands thoroughly after handling.
HANDLING (PHYSICAL ASPECTS):
Agitate containers before use. Keep from freezing. Keep out of reach of children.
STORAGE PRECAUTIONS:
Recommended storage is less than 90°F. Avoid extreme temperatures. Keep container closed when not in use. Store in a
cool dry place.
|
|
COMPONENT LISTING:
Chemical Name |
Amount |
CAS Number |
Solvent Naptha |
32±3% |
67472-89-8 |
Toluene |
13±3% |
108-88-3 |
Xylene |
12±3% |
1330-20-7 |
Ethyl Benzene |
3% |
100-41-4 |
Polymer |
30% |
Mixture |
Titanium Dioxide |
18±4% |
13463-67-7 |
Preservative |
1% |
Mixture |
Benzene |
0-100ppm |
71-43-2 |
Acetone |
14±1% |
67-64-1 |
(See Section 8 for exposure guidelines.)
(See Section 15 for regulatory information.)
HAZARDS DISCLOSURE
This product contains hazardous materials that are subject to reporting under Section 313 of Title III: VM&P Naptha &
Xylene.
As defined under Sara 311 and 312, this product contains materials that are fire hazards. |
EYE / FACE PROTECTION REQUIREMENTS:
Wear safety glasses. A respiratory protection program that meets OSHA's 29 CFR 1910-134 and ANSI Z88-2
requirements must be followed whenever workplace conditions warrant a respirator's use.
SKIN PROTECTION REQUIREMENTS:
Selection of specific items such as gloves, boots, apron or full-body suit will depend on operation. Wash hands thoroughly
after handling.
RESPIRATORY PROTECTION REQUIREMENTS:
Use NIOSH approved vapor canister or supplied-air respiratory protection in confined spaces that are not ventilated. Use
adequate ventilation to keep concentration of vapors below exposure limits.
EXPOSURE GUIDELINES:
| werwerwe |
werwerw |
werwerwer |
Xylene |
ACGIH time weighted average |
100ppm |
Xylene |
ACGIH short term exposure limit |
150ppm |
Xylene |
OSHA Z1 permissible exposure limit |
100ppm |
Xylene |
NIOSH recommended exposure limit |
435 mg/m3 |
Xylene |
NIOSH short term exposure limit |
150ppm |
Solvent Naphtha (Petroleum) |
OSHA Z1 time weighted average |
500 ppm |
Solvent Naphtha (Petroleum) |
ACGIH time weighted average |
300 ppm (1,370 mg/m3) |
Toluene |
ACGIH time weighted average |
20 ppm |
Toluene |
OSHA time weighted average |
200 ppm |
Toluene |
OSHA Permissible Exposure Limit (ceiling) |
300 ppm |
Ethyl Benzene |
ACGIH time weighted average |
100 ppm |
Ethyl Benzene |
ACGIH short term exposure limit |
125 ppm |
Ethyl Benzene |
NIOSH recommended exposure limit |
125 ppm (435 mg/m3) |
Ethyl Benzene |
NIOSH short term exposure limit |
125 ppm (545mg/m3) |
Ethyl Benzene |
OSHA Z1 permissible exposure limit |
100 ppm (435 mg/m3) |
Benzene |
ACGIH short term exposure limit |
2.5 ppm |
Benzene |
OSHA short term exposure limit |
5 ppm |
Benzene |
ACGIH time weighted average |
0.5 ppm |
Benzene |
OSHA time weighted average |
1 ppm |
Acetone |
OSHA short term exposure limit |
750 ppm |
Acetone |
ACGIH time weighted average |
500 ppm |
Acetone |
OSHA Permissible Exposure Limit |
1000 ppm |
| werwerwe |
werwerw |
FORM |
Liquid |
COLOR |
White |
ODOR |
Strong Solvent Odor |
BOILING POINT |
281 – 284 F |
EVAPORATION RATE |
Slower than Ether |
% VOLATILE VOLUME |
78±3% |
DENSITY |
7.2 lbs. |
STABILITY:
Stable.
POLYMERIZATION
Polymerization may occur when product is heated.
DECOMPOSITION:
Decomposition will not occur if handled and stored properly. Reaction with water can create CO2
No information available.
No information available.
WASTE DISPOSAL:
Treat or dispose of waste material in accordance with all local, state/provincial, and national requirements.
PRODUCT LABEL: PrimeLock MultiSurface Primer
SHIPPING NAME: n/a
SHIPPING CLASS: UN1263
SARA Hazard Classification
Solvent Fire Hazard
Acute Health Hazard
Chronic Health Hazard
TSCA
All components of this product are believed to be in compliance with the inventory listing requirements of the US Toxic
Substances Control Act (TSCA) Chemical Substances Inventory.
RCRA Hazardous Substances
XYLENE (1330-20-7) — RCRA Code: U239
California Prop. 65
WARNING – This product contains a chemical known in the State of California to cause cancer.
BENZENE
ETHYL BENZENE
WARNING – This product contains a chemical known in the State of California to cause birth defects or other reproductive
harm.
TOLUENE
BENZENE
LACOLENE 20071
Right to Know
This product contains chemicals listed on one or more state Right to Know laws including but not limited to
Massachusetts, New Jersey and Pennsylvania.
Benzene
Toluene
Ethyl Benzene
Xylene
The information contained in this MSDS is accurate to the best of our knowledge. It is intended to assist the user in his
evaluation of the product’s hazards, and safety precautions to be taken in its use. We do not assume liability for the use
of, or reliance on this information, nor do we guarantee its accuracy or completeness.
|
