|
EPDM COATINGS
2660 North Ave Suite 214 Bridgeport, CT 06604
E-Mail: info@fixallroofs.com
Website: http://www.fixallroofs.com
EnergyGuard Acrylic Elastomeric Roof Coating is a high solids, waterproof, roof coating for all types of roofs.
Built Up Roofing (BUR), Concrete Roofs, Metal Roofs, Modified Bitumen, Polyurethane Foam, Single Ply Roofing (EPDM, PVC, TPO).
- Provides a seamless, durable membrane.
- Superior adhesion to various substrates.
- Contains fungicides and mildewcides.
- Excellent UV protection for polyurethane foam.
- Heat reflective coating helps reduce cooling costs.
- Reflects the sun's UV-rays and prevents premature degradation.
- Prevents premature roof failure by controlling thermal cycling.
- Easy to use, non-toxic and VOC compliant water based coating.
|
|
See table on the following page.
All surfaces to be coated must be clean, dry and free of any oil, grease or dirt.
Any existing coating must be checked for good adhesion.
Before application, any loosely adhered coating must be removed and bare surfaces must be prepared, cleaned and checked for compatibility.
EnergyGuard Acrylic Elastomeric Roof Coating is ready to use. Thinning is not recommended.
Containers should not be left open for extended periods of time.
Follow our roof repair and roof restoration procedures and always perform a coating adhesion test before doing the entire roof.
Spray: Airless Sprayer , 1gpm, 3,000 psi, .027 or .031 tip.
Brush: Good quality synthetic bristle brush.
Roller: Long nap roller.
Clean Up: Water |
EnergyGuard Acrylic Elastomeric Roof Coating is available directly from Fixallroof Coatings, from authorized distributors and online. Contact Fixallroof Coatings for referral to a local Sales Representative or visit our website.
Pricing information can be obtained from Fixallroof Sales Representatives.
Periodic maintenance of Fixallroof Roof Restoration System ensures extended service life and maintains reflectivity.
Contact Fixallroof Coatings for Technical Support. Additional information, product literature, brochures, and specifications are available.
Additional product information is available from Fixallroof Coatings. |
|
Property |
Value |
Test Method |
Color: |
White or any custom color |
|
Viscosity: |
6,000 - 8,000cps |
Brookfield |
Solids by weight: |
64% ± 2% |
|
Solids by volume: |
55% ± 2% |
|
Density: |
11.2 ± .2 lbs per gallon |
|
Hardness: |
45 Shore A |
ASTM D-2240 |
Tensile Strength: |
400 ± 50 psi |
ASTM D-412 |
Permeability: |
3.5 perms |
ASTM E-96 |
Elongation: |
315% |
ASTM D-412 |
Flash Point: |
None |
|
Coverage: |
1.5 - 2.0 gal/100 s.f. per coat. 2 coats recommended. |
|
Application Temperature: |
55°F - 100°F, Less than 85% relative humidity. |
|
Dry Time: |
Dry to touch in 4 - 6 hours, 12 - 24 hours to recoat. |
|
Shelf Life: |
12 months @ 40°-90°F |
|
Clean Up: |
Water |
|
VOC: |
<100 g/lit > |
|
|
EnergyGuard Acrylic Elastomeric Roof Coating is a water-based product which will freeze and become unusable at temperatures below 32°F. Suspend all application if conditions prevent a complete cure before sunset, rain, fog, dew or freezing temperatures. Fixallroof Coatings must be completely dry before exposing to water or foot traffic. Keep Fixallroof Coatings containers covered when not in use. Dispose of all containers in accordance with state and local environmental regulations. Keep away from children. If ingested, DO NOT induce vomiting. Call Physician immediately.
Product information contained herein are presented in good faith and believed to be reliable. They do not constitute part of our terms and conditions of sale. It is also not a guarantee, either expressed or implied, that the data are correct or that products described are merchantable or fit for a particular purpose as methods of use are beyond our control. Customer should determine the suitability of our materials and installation recommendations before usage. Manufacturer's sole responsibilty shall be to replace that portion of any product.
|
